Metal Abrasive – Your Professional Steel Abrasive Solutions – LIVEK

430 304 Stainless Steel Cut Wire Shot Stainless Steel Shot Ball For Shot Blasting

admin — Sun, 16 Apr 2023 08:02:17 +0000

Round stainless steel shot is delicately with the process of drawing, cutting, and conditioned etc. and with the appearance of brightness, restlessness and spherical beads (for cut wire shot, cylinders). And they are widely used for the surface preparation by peening and blasting on Copper, Aluminum, Zinc and stainless steel work pieces etc.. Thus the work can illustrate their metal color with sub-light effects and die casting restlessness after preparation. There is no need to adopting rust moving treatment by acid cleaning. Besides their abrasion resistance is 3-5 times as much than cast stainless steel shot, so the production could be cut down.

Roundess: G1 G2 G3,
Size: 0.4-2.5mm

Material: SS304 SS410 SS430 SS202 SS316
TDS and MSDS are provided.
SAE/ ISO9001:2008 standard

Application of round stainless steel shot for metal surface

Clean: blasting cleaning; pressure casting cleaning; magnesium alloy, zinc alloy, aluminum alloy and copper alloy casting fettling; stainless steel casting cleaning; stainless steel plate cleaning; stainless steel products cleaning; Colored pieces surface deburring and lighting processing, it can improve the fatigue resistance, anti-corrosion properties and cover casting surface defect, also make the product surface good.
Derust: shot blasting ; derusting casting; forgings derusting; Steel plate rust removal; steel products rust removal;
Intensify: stainless steel produces intensifying; heat-treated pieces surface intensifying;
Blasting: magnesium alloy, zinc alloy, aluminum alloy and copper alloy cast blasting; stainless steel products blasting.

The post 430 304 Stainless Steel Cut Wire Shot Stainless Steel Shot Ball For Shot Blasting appeared first on Your Professional Steel Abrasive Solutions - LIVEK.

Low Price Alloy Steel Shot And Grit S330 S390 S280 S170 For Sale

admin — Sun, 16 Apr 2023 07:33:23 +0000

Model: S780/SS2.5,S660/SS2.0 ,S550/SS1.7 ,S460/SS1.4 ,S390/SS1.2 ,S330/SS1.0 ,S280/SS0.8 ,S230/SS0.6 ,S170/SS0.5, S140/SS0.4 ,S110/SS0.3 ,S70/SS0.2 Specification : Products Steel Shot Chemical Composition C 0.70～1.20% Mn 0.35～1.20% Si 0.40～1.20% S ≤0.05% P ≤0.05% Microhardness Normal:40～50HRC (377～509HV) Special:52～56HRC (543～620HV) Special:56～60HRC (620～713HV) Hardness Deviation Max Deviation ±3.0HRC Microstructure Tempered Martensite or Sorbite Density 7.2g/cm3 SAE Steel shot Application S-780 S-660 Knock-out or descaling large cast iron, cast steel, iron pipe,

The post Low Price Alloy Steel Shot And Grit S330 S390 S280 S170 For Sale appeared first on Your Professional Steel Abrasive Solutions - LIVEK.

SAE Standard Cast Steel Shot S780 S660 S550 S460 S390 S330 S280 For Shot Blasting Rust Removal

admin — Sun, 16 Apr 2023 07:28:29 +0000

The post SAE Standard Cast Steel Shot S780 S660 S550 S460 S390 S330 S280 For Shot Blasting Rust Removal appeared first on Your Professional Steel Abrasive Solutions - LIVEK.

SS410 SS430 SS304 Conditioned Round Stainless Steel Shot Cut Wire Shot 0.3mm 0.6mm For Alloy Parts Blasting

admin — Fri, 09 Dec 2022 11:30:28 +0000

Roundess: G1 G2 G3,
Size: 0.4-2.5mm

Material: SS304 SS410 SS430 SS202 SS316
TDS and MSDS are provided.
SAE/ ISO9001:2008 standard

Application of round stainless steel shot for metal surface

The post SS410 SS430 SS304 Conditioned Round Stainless Steel Shot Cut Wire Shot 0.3mm 0.6mm For Alloy Parts Blasting appeared first on Your Professional Steel Abrasive Solutions - LIVEK.

High Quality Bearing Steel Grit for Marble and Granite Cutting , Shot Blasting

admin — Sun, 24 Jul 2022 12:51:12 +0000

Name Data
C 0.8-1.2%
Si 0.4-1.2%
Mn 0.6-1.2%
Cr 1.0-1.5%
Hardness GP 41-50HRC;GL 50-55HRC;GH 63-68HRC
Density 7.6g/cm3
Micro structure Martensite structure
Type G120,G80,G50,G40,G25,G18,G16,G14,G12,G10
Diameter 0.2mm,0.3mm,0.5mm,0.7mm,1.0mm,1.2mm,1.4mm,1.6mm,2.0mm,2.5mm
Application 1.Blast cleaning: Used for blast cleaning of casting, die-casting,forging; sand removal of casting, steel plate, H type steel, steel structure.
2.Rust removal: Rust removal of casting, forging, steel plate, H type steel,steel structure.
3.Shot peening: Shot penning of gear, heat treated parts.
4.Shot blasting: Shot blasting of profile steel, ship board, steel board, steel material,steel structure.
5.Marble and granite cutting

The post High Quality Bearing Steel Grit for Marble and Granite Cutting , Shot Blasting appeared first on Your Professional Steel Abrasive Solutions - LIVEK.

Conditioned Carbon Steel Cut Wire Shot 0.3mm to 1.5mm for Shot Peening and Blasting

admin — Wed, 23 Mar 2022 12:11:52 +0000

conditioned steel cut wire shot implements the steel wire cut shot standard—JB/T8354-1996, which has the advantages of steel wire cut shot, and also has the following characteristics:

1. Appearance

conditioned steel cut wire shotshould be oval, and the number of ultra-long and flat flake particles in the finished product should not exceed 10% of the inspected amount;

2. Specifications

The specification range of conditioned steel cut wire shot is 0.3mm, 0.4mm 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.4mm, 1.7mm, 1.8mm, 2.0mm, 2.4mm.

3. Technical requirements

The chemical composition and content of the abrasive pellets shall meet the following requirements:

chemical composition

C :0.65-1.10

Si:0.8-1.65

Mn:1.20-2.0

P:<0.05 S:<0.05 4. Hardness HRC of conditioned steel cut wire shot: 50-65 (not tempered) HRC: 40-50 (tempered) 5. Metallographic organization The metallographic structure of theconditioned steel cut wire shot is tempered martensite, tempered troostite 6. Cracks conditioned steel cut wire shot with cracks shall not exceed 3% of the inspected amount 7. Physical properties The willfulness of the conditioned steel cut wire shot is I, and the tensile strength is 1520N/m㎡ Eight, one, cycle life The cycle life of conditioned steel cut wire shot is more than 3 times that of cast steel shot and wire cut shot. To sum up, the conditioned steel cut wire shot has obvious advantages over other products in terms of manufacturing and selection of raw materials. It has the characteristics of high manganese steel. At the same time, the conditioned steel shot has no holes, no cracks, and the hardness of the conditioned shot is balanced. In comparison, other products such as steel wire cut shot and cast steel shot have poor toughness, short life, high cost and relatively small scope of application; the above advantages are sufficient to show that grinding steel shot is much stronger than other projectile products. Finally, when it comes to cost performance, the same performance versus quality, the same quality versus price, superior quality, and superior price, under the same conditions, the ultimate purpose of using the product is to achieve the best surface cleaning, and the national standards for cast steel shot allow There are defects such as pores, cracks, and short service life. The steel wire cut shot has no leading angle, has edges and corners, and runs on a track, which causes great damage to the equipment and workpiece, and is highly destructive, thus increasing the cost; while the grinding shot overcomes the above two. All the weaknesses of this product, no pores, no cracks, its life is 2.5 times that of cast steel shot. In short, to achieve the best surface cleaning results, conditioned steel cut wire shot is the first choice.

The post Conditioned Carbon Steel Cut Wire Shot 0.3mm to 1.5mm for Shot Peening and Blasting appeared first on Your Professional Steel Abrasive Solutions - LIVEK.

SS201 SS304 Stainless Steel Ballcone Flying Saucer Ball Tumbling Media Shot for Jeweler Tumbler Finish

admin — Fri, 24 Dec 2021 10:56:42 +0000

Ballcones shaped tumbling media shots combine the burnishing capabilities of eclipses / round balls and cones shape shot into one proportioned shape. This shape provides for burnishing action and facilitates corners – edges and recesses.
Material : Stainless steel , carbon steel , bearing steel and so on

Size:   2*3, 2.5*3.5, 2*4, 3*5, 3.5*5.5, 4.5*7, 5*7, 6*8, 6*9, 7*10 , 8*11, 8*12, 8.5*13, 10*14mm
as per your requirement

Grade : G8 G16 G40 G60 G100 G200 G500 G1000

Precision:  G8:±0 μm        G16:±0.4 μm     G40:±1 μm       G60:±2 μm
G100:±2.5μm G200:±5μm       G500 :±10μm   G1000 :±20μm
Standard: AISI ,ASTM ,DIN ,EN,GB,JIS

Application:
Our flying saucer ball has strong ductility, corrosion resistance, strong conductivity and small friction.Apply to special valves, supply pumps and valves, electronic equipment, switches, heating devices, home appliances, automotive, electronic and petrochemical industries.

Tumbling and Vibrating Media. Successful finishing of jewelry using rotary tumblers or vibratory machines, for deburring or burnishing, depends on two equally important factors: the equipment and the media. Proper selection to suit your particular needs is essential. We will assist in recommending the best combination for you. Special media available on special order.

Features
Stainless Steel shot mix for rotary or vibratory tumblers.
BALLCONES STAINLESS STEEL SHOT TUMBLING MEDIA- SIZE 1/8″ – 5 POUND-BAG
Balcones shaped tumbling media shots combine the burnishing capabilities of eclipses / round balls and cones shape shot into one proportioned shape. This shape provides for burnishing action and facilitates corners – edges and recesses.

Mainly used for burnishing, cleaning and light deburring. This media wears very slowly with a life of up to 10,000 hours. For a burnished finish it is recommended that the media is used with the burnishing compound in the Vibratory Bowl Ball Burnishing machine series which has the added reinforcement needed to cope with the weight of the media.
Stainless Steel Balls (available in sizes ranging from 2mm to 6mm in diameter)
Stainless Steel Ball Cones (dimensions on request).
Stainless Steel Pins (dimensions on request).

The post SS201 SS304 Stainless Steel Ballcone Flying Saucer Ball Tumbling Media Shot for Jeweler Tumbler Finish appeared first on Your Professional Steel Abrasive Solutions - LIVEK.

GXB-2750A Portable Steel Shot Grit Iron Sand Recycling Trolley Manufacturer and Supplier

admin — Thu, 23 Dec 2021 12:51:12 +0000

GXB-2750A steel shot, iron sand and iron powder recycling trolley, suitable for small casting and leaf spring industries. Lightweight and convenient, free of space constraints, simple operation and no maintenance costs.

Specification:
Body length: 1670mm
Body width: 690mm
Height between body and ground: 240mm
Wheel height: 325mm

The post GXB-2750A Portable Steel Shot Grit Iron Sand Recycling Trolley Manufacturer and Supplier appeared first on Your Professional Steel Abrasive Solutions - LIVEK.

Pure Copper Cut Wire Shot , Copper Shot , Copper Granules granulars 2.0mm for blasting

admin — Wed, 25 Aug 2021 08:10:15 +0000

Specification of copper cut wire shot

Products Copper Cut Wire Shot
Chemical Composition Cu:58-99%,The Rest Is Zn
Microhardness 110~300HV
Tensile Intensity 200~500Mpa
Durability 5000 Times
Microstructure Deformed α or α+β
Density 8.9g/cm3
Bulk Density 5.1g/cm3
Application

It is widely used in surface treatment such as descaling, burr removing, elimination of surface defects, internal stress relief, etching, matte finish, leveling, strengthening and rust prevention before applying in the metal die castings, precision castings, hardware & tools, machinery manufacturing, auto parts, instruments & meters, pumps and valves industries.

The post Pure Copper Cut Wire Shot , Copper Shot , Copper Granules granulars 2.0mm for blasting appeared first on Your Professional Steel Abrasive Solutions - LIVEK.

High Purity Aluminum Cut Wire Shot ,Aluminum Shot 2.0mm for blasting

admin — Wed, 25 Aug 2021 07:57:48 +0000

Available Size
0.6mm-12mm
Specification
Products Aluminium Cut Wire Shot
Chemical Composition Al≥99.97%
Microhardness 45~50HV
Tensile Intensity 80~240Mpa
Durability 6500 Times
Microstructure Deformed α
Density 2.7g/cm3
Bulk Density 5.1g/cm3

Application
It is widely used in surface treatment such as descaling, burr removing, elimination of surface defects, internal stress relief, etching, matte finish, leveling, strengthening and rust prevention before applying in the metal die castings, precision castings, hardware & tools, machinery manufacturing, auto parts, instruments & meters, pumps and valves industries.

The post High Purity Aluminum Cut Wire Shot ,Aluminum Shot 2.0mm for blasting appeared first on Your Professional Steel Abrasive Solutions - LIVEK.